[an error occurred while processing this directive] [an error occurred while processing this directive][an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive] (none) [an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive][an error occurred while processing this directive] [an error occurred while processing this directive][an error occurred while processing this directive] [an error occurred while processing this directive][an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive] (none) [an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive][an error occurred while processing this directive]
 
[an error occurred while processing this directive] [an error occurred while processing this directive]
Skåne Sjælland Linux User Group - http://www.sslug.dk Home   Subscribe   Mail Archive   Forum   Calendar   Search
MhonArc Date: [Date Prev] [Date Index] [Date Next]   Thread: [Date Prev] [Thread Index] [Date Next]   MhonArc
 

Re: [NETVAERK] Server forsvundet



Den 21-02-2005 kl 20:56 skrev Bernt Hertz Jensen:

>Bjørn Fahnøe wrote:
>> Nu ved jeg ikke hvor du står, men her er et par forslag:
>> kør
>> testparm -v
>
>Undskyld, men her kommer der en meget lang udskrift. Jeg ved ikke, hvad
>der er (u)væsentligt, så jeg poster hele svineriet sidst i dette indlæg
>for ikke at plage unødigt. Men der er ikke som sådan noget, der springer
>mig i øjnene....
>
>
>
> > Kontroller din smbpasswd, er dine brugere her og ser de ud som
>nedenstående:
> > bruger-id:505:AC6H.........osv.
>
>Tjek!
>
> > Har du logget ind på dine windowsmaskiner med rigtigt brugernavn og
>password?
>
>Jaeh... Men ellers skulle den vel spørge?
>
>/bernt
>
>---dump---
>
>sslug@sslug ~]# testparm -v
>Load smb config files from /etc/samba/smb.conf
>Processing section "[homes]"
>Processing section "[printers]"
>Processing section "[musik]"
>Processing section "[film]"
>Processing section "[bhj]"
>Processing section "[media]"
>Processing section "[html]"
>Loaded services file OK.
>Server role: ROLE_STANDALONE
>Press enter to see a dump of your service definitions
>
># Global parameters
>[global]
>         dos charset = CP850
>         unix charset = UTF-8
>         display charset = LOCALE
>         workgroup = HERTZ
>         realm =
>         netbios name = PISKOETER
>         netbios aliases =
>         netbios scope =
>         server string = sslug@sslug
>         interfaces =
>         bind interfaces only = No
>         security = SHARE
>         auth methods =
>         encrypt passwords = No
Her skal der i hvert fald stå yes, ellers skal du ind og rode i registreringsbasen i windows for at slå kryptering fra.
Dette vil klart forhindre indlog
>         update encrypted = No
>         client schannel = Auto
>         server schannel = Auto
>         allow trusted domains = Yes
>         hosts equiv =
>         min password length = 5
>         map to guest = Never
>         null passwords = No
>         obey pam restrictions = No
>         password server = *
>         smb passwd file = /etc/samba/smbpasswd
>         private dir = /etc/samba
>         passdb backend = smbpasswd
>         algorithmic rid base = 1000
>         root directory =
>         guest account = nobody
>         pam password change = No
>         passwd program =
>         passwd chat = *new*password* %n\n *new*password* %n\n *changed*
>         passwd chat debug = No
>         passwd chat timeout = 2
>         check password script =
>         username map =
>         password level = 0
>         username level = 0
>         unix password sync = No
>         restrict anonymous = 0
>         lanman auth = Yes
>         ntlm auth = Yes
>         client NTLMv2 auth = No
>         client lanman auth = Yes
>         client plaintext auth = Yes
>         preload modules =
>         use kerberos keytab = No
>         log level = 0
>         syslog = 1
>         syslog only = No
>         log file = /var/log/samba/%m.log
>         max log size = 50
>         debug timestamp = Yes
>         debug hires timestamp = No
>         debug pid = No
>         debug uid = No
>         smb ports = 445 139
>         large readwrite = Yes
>         max protocol = NT1
>         min protocol = CORE
>         read bmpx = No
>         read raw = Yes
>         write raw = Yes
>         disable netbios = No
>         acl compatibility =
>         defer sharing violations = Yes
>         nt pipe support = Yes
>         nt status support = Yes
>         announce version = 4.9
>         announce as = NT
>         max mux = 50
>         max xmit = 16644
>         name resolve order = lmhosts wins host bcast
>         max ttl = 259200
>         max wins ttl = 518400
>         min wins ttl = 21600
>         time server = No
>         unix extensions = Yes
>         use spnego = Yes
>         client signing = auto
>         server signing = No
>         client use spnego = Yes
>         change notify timeout = 60
>         deadtime = 0
>         getwd cache = Yes
>         keepalive = 300
>         kernel change notify = Yes
>         lpq cache time = 10
>         max smbd processes = 0
>         paranoid server security = Yes
>         max disk size = 0
>         max open files = 10000
>         socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
>         use mmap = Yes
>         hostname lookups = No
>         name cache timeout = 660
>         load printers = Yes
>         printcap cache time = 0
>         printcap name = /etc/printcap
>         cups server =
>         disable spoolss = No
>         enumports command =
>         addprinter command =
>         deleteprinter command =
>         show add printer wizard = Yes
>         os2 driver map =
>         mangling method = hash2
>         mangle prefix = 1
>         stat cache = Yes
>         machine password timeout = 604800
>         add user script =
>         delete user script =
>         add group script =
>         delete group script =
>         add user to group script =
>         delete user from group script =
>         set primary group script =
>         add machine script =
>         shutdown script =
>         abort shutdown script =
>         logon script =
>         logon path = \\%N\%U\profile
>         logon drive =
>         logon home = \\%N\%U
>         domain logons = No
>         os level = 20
>         lm announce = Auto
>         lm interval = 60
>         preferred master = Auto
>         local master = Yes
>         domain master = Auto
>         browse list = Yes
>         enhanced browsing = Yes
>         dns proxy = No
>         wins proxy = No
>         wins server =
>         wins support = No
>         wins hook =
>         wins partners =
>         kernel oplocks = Yes
>         lock spin count = 3
>         lock spin time = 10
>         oplock break wait time = 0
>         ldap admin dn =
>         ldap delete dn = No
>         ldap filter = (uid=%u)
>         ldap group suffix =
>         ldap idmap suffix =
>         ldap machine suffix =
>         ldap passwd sync = no
>         ldap replication sleep = 1000
>         ldap suffix =
>         ldap ssl =
>         ldap timeout = 15
>         ldap user suffix =
>         add share command =
>         change share command =
>         delete share command =
>         config file =
>         preload =
>         lock directory = /var/cache/samba
>         pid directory = /var/run
>         utmp directory =
>         wtmp directory =
>         utmp = No
>         default service =
>         message command =
>         dfree command =
>         get quota command =
>         set quota command =
>         remote announce =
>         remote browse sync =
>         socket address = 0.0.0.0
>         homedir map = auto.home
>         afs username map =
>         time offset = 0
>         NIS homedir = No
>         panic action =
>         host msdfs = No
>         enable rid algorithm = Yes
>         idmap backend =
>         idmap uid = 16777216-33554431
>         idmap gid = 16777216-33554431
>         template primary group = nobody
>         template homedir = /home/%D/%U
>         template shell = /bin/false
>         winbind separator = \
>         winbind cache time = 300
>         winbind enable local accounts = No
>         winbind enum users = Yes
>         winbind enum groups = Yes
>         winbind use default domain = No
>         winbind trusted domains only = No
>         winbind nested groups = No
>         comment =
>         path =
>         username =
>         invalid users =
>         valid users =
>         admin users =
>         read list =
>         write list =
>         printer admin =
>         force user =
>         force group =
>         read only = Yes
>         create mask = 0744
>         force create mode = 00
>         security mask = 0777
>         force security mode = 00
>         directory mask = 0755
>         force directory mode = 00
>         directory security mask = 0777
>         force directory security mode = 00
>         force unknown acl user = No
>         inherit permissions = No
>         inherit acls = No
>         guest only = No
>         guest ok = No
>         only user = No
>         hosts allow =
>         hosts deny =
>         ea support = No
>         nt acl support = Yes
>         profile acls = No
>         map acl inherit = No
>         afs share = No
>         block size = 1024
>         max connections = 0
>         min print space = 0
>         strict allocate = No
>         strict sync = No
>         sync always = No
>         use sendfile = No
>         write cache size = 0
>         max reported print jobs = 0
>         max print jobs = 1000
>         printable = No
>         printing = cups
>         cups options = raw
>         print command =
>         lpq command =
>         lprm command =
>         lppause command =
>         lpresume command =
>         queuepause command =
>         queueresume command =
>         printer name =
>         use client driver = No
>         default devmode = No
>         force printername = No
>         default case = lower
>         case sensitive = Auto
>         preserve case = Yes
>         short preserve case = Yes
>         mangling char = ~
>         hide dot files = Yes
>         hide special files = No
>         hide unreadable = No
>         hide unwriteable files = No
>         delete veto files = No
>         veto files =
>         hide files =
>         veto oplock files =
>         map system = No
>         map hidden = No
>         map archive = Yes
>         mangled names = Yes
>         mangled map =
>         store dos attributes = No
>         browseable = Yes
>         blocking locks = Yes
>         csc policy = manual
>         fake oplocks = No
>         locking = Yes
>         oplocks = Yes
>         level2 oplocks = Yes
>         oplock contention limit = 2
>         posix locking = Yes
>         strict locking = Yes
>         share modes = Yes
>         copy =
>         include =
>         preexec =
>         preexec close = No
>         postexec =
>         root preexec =
>         root preexec close = No
>         root postexec =
>         available = Yes
>         volume =
>         fstype = NTFS
>         set directory = No
>         wide links = Yes
>         follow symlinks = Yes
>         dont descend =
>         magic script =
>         magic output =
>         delete readonly = No
>         dos filemode = No
>         dos filetimes = No
>         dos filetime resolution = No
>         fake directory create times = No
>         vfs objects =
>         msdfs root = No
>         msdfs proxy =
>
>[homes]
>         comment = Home Directories
>         read only = No
>         browseable = No
>
>[printers]
>         comment = All Printers
>         path = /var/spool/samba
>         printable = Yes
>         browseable = No
>
>[musik]
>         comment = Musik
>         path = /home/media/musik
>         guest ok = Yes
>
>[film]
>         comment = Film
>         path = /home/media/film
>         guest ok = Yes
>
>[bhj]
>         comment = bhj
>         path = /home/bhj
>         valid users = bhj
>         read only = No
>
>[media]
>         comment = Media
>         path = /home/media
>         valid users = bhj
>         read only = No
>
>[html]
>         comment = Websites
>         path = /var/www/html
>         valid users = adm, bhj
>         read only = No
>
>
>---undump---
>
>/Bernt

*********** Citat slut  ***********
Hej Bernt
Jeg har lige kort set på det, skal nok se nærmere på den senere i dag.
Men du skal altså have encrypt password = yes ellers kan du slet ikke logge ind.
Bjørn



 
Home   Subscribe   Mail Archive   Index   Calendar   Search

 
 
Questions about the web-pages to <www_admin>. Last modified 2005-08-10, 22:42 CEST [an error occurred while processing this directive]
This page is maintained by [an error occurred while processing this directive]MHonArc [an error occurred while processing this directive] # [an error occurred while processing this directive] *